You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

I turned on my MacBook Air and after 10 sec my screen flaked and did some weird sounds, went black and I couldn’t turn it back on again since then

I turned on my MacBook Air and after 10 sec screen flaked and did some weird sounds and went black and finally shot off and I couldn’t turn it back on again since then.

i plugged it in to power and the restart works since I already held down Shift+Control+Command+Power and the charging light goes green for 2sec and goes orange afterwards

any suggestion?




[Re-Titled by Moderator]


Posted on Mar 30, 2020 7:33 PM

Reply
Question marked as Top-ranking reply

Posted on Mar 30, 2020 7:49 PM

A Troubleshooting Procedure that may Fix Problems with macOS El Capitan or Later


You should try each, one at a time, then test to see if the problem is fixed before going on to the next.


    Be sure to backup your files before proceeding if possible.


  1. Shutdown the computer, wait 30 seconds, restart the computer.
  2. Disconnect all third-party peripherals.
  3. Resetting your Mac's PRAM and NVRAM
  4. Reset the System Management Controller (SMC)
  5. Reset your Startup Disk and Sound preferences, if needed, after resetting the PRAM.
  6. Test in safe mode to see if the problem persists, then restart normally.  Use safe mode to isolate issues with your Mac and Playing Safe - what does Safe mode do?
  7. Repair the disk by booting from the Recovery HD. Immediately after the chime hold down the Command and R keys until the Utility Menu appears. Choose Disk Utility and click on the Continue button. Select the indented (usually, Macintosh HD) volume entry from the side list.  Click on the First Aid button in the toolbar. Wait for the Done button to appear. Quit Disk Utility and return to the Utility Menu. Restart the computer from the Apple Menu.
  8. Repair permissions on the Home folderResolve issues caused by changing the permissions of items in your home folder.
  9. Create a New User Account Open Users & Groups preferences. Click on the lock icon and enter your Admin password when prompted. On the left under Current User click on the Add [+] button under Login Options. Setup a new Admin user account. Upon completion log out of your current account then log into the new account. If your problems cease, then consider switching to the new account and transferring your files to it - Transferring files from one User Account to another.
  10. Reinstall OS X by booting from the Recovery HD using the Command and R keys. When the Utility Menu appears select Install OS X then click on the Continue button.
  11. Erase and Install OS X Restart the computer. Immediately after the chime hold down the Command and R keys until the Apple logo appears. When the Utility Menu appears:


     1. Select Disk Utility from the Utility Menu and click on the Continue button.

     2. When Disk Utility loads select the drive (out-dented entry) from the Device list.

     3. Click on the Erase button in Disk Utility's toolbar. A panel will drop down.

     4. Set the Format type to APFS (for SSDs only) or Mac OS Extended (Journaled.)

     5. Click on the Apply button, then wait for the Done button to activate and click on it.

     6. Quit Disk Utility and return to the Utility Menu.

     7. Select Install OS X and click on the Continue button.



Similar questions

2 replies
Question marked as Top-ranking reply

Mar 30, 2020 7:49 PM in response to amirali293

A Troubleshooting Procedure that may Fix Problems with macOS El Capitan or Later


You should try each, one at a time, then test to see if the problem is fixed before going on to the next.


    Be sure to backup your files before proceeding if possible.


  1. Shutdown the computer, wait 30 seconds, restart the computer.
  2. Disconnect all third-party peripherals.
  3. Resetting your Mac's PRAM and NVRAM
  4. Reset the System Management Controller (SMC)
  5. Reset your Startup Disk and Sound preferences, if needed, after resetting the PRAM.
  6. Test in safe mode to see if the problem persists, then restart normally.  Use safe mode to isolate issues with your Mac and Playing Safe - what does Safe mode do?
  7. Repair the disk by booting from the Recovery HD. Immediately after the chime hold down the Command and R keys until the Utility Menu appears. Choose Disk Utility and click on the Continue button. Select the indented (usually, Macintosh HD) volume entry from the side list.  Click on the First Aid button in the toolbar. Wait for the Done button to appear. Quit Disk Utility and return to the Utility Menu. Restart the computer from the Apple Menu.
  8. Repair permissions on the Home folderResolve issues caused by changing the permissions of items in your home folder.
  9. Create a New User Account Open Users & Groups preferences. Click on the lock icon and enter your Admin password when prompted. On the left under Current User click on the Add [+] button under Login Options. Setup a new Admin user account. Upon completion log out of your current account then log into the new account. If your problems cease, then consider switching to the new account and transferring your files to it - Transferring files from one User Account to another.
  10. Reinstall OS X by booting from the Recovery HD using the Command and R keys. When the Utility Menu appears select Install OS X then click on the Continue button.
  11. Erase and Install OS X Restart the computer. Immediately after the chime hold down the Command and R keys until the Apple logo appears. When the Utility Menu appears:


     1. Select Disk Utility from the Utility Menu and click on the Continue button.

     2. When Disk Utility loads select the drive (out-dented entry) from the Device list.

     3. Click on the Erase button in Disk Utility's toolbar. A panel will drop down.

     4. Set the Format type to APFS (for SSDs only) or Mac OS Extended (Journaled.)

     5. Click on the Apply button, then wait for the Done button to activate and click on it.

     6. Quit Disk Utility and return to the Utility Menu.

     7. Select Install OS X and click on the Continue button.



Mar 30, 2020 7:49 PM in response to Kappy

If nothing here has helped: Make an appointment at the Apple Genius Bar for service after the stores re-open. If you need to find an Apple Store - Find a Store - Apple. Also, see How to find your nearest Apple Authorized Service Provider (AASP) or Distributor (AAD).


"Your Apple-branded or Beats-branded hardware product (“Product”) is warranted against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase (“Warranty Period”) when used in accordance with Apple`s user manuals (refer to www.apple.com/support/country). Under this warranty, you will be able to direct your claims to Apple even in situations where you purchased the Apple Product from a third party.” [Apple One (1) Year Limited Warranty – Accessory - For Apple and Beats Branded Products Only.]



I turned on my MacBook Air and after 10 sec my screen flaked and did some weird sounds, went black and I couldn’t turn it back on again since then

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.