You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

My iPad will not print to my Epsom printer, despite showing connected to my home wifi for both. My phones will both print. Only difference is that our iPads are updated to 14.5.1, and as yet our iPhones are not is this a problem with the update?

Is the updated software the problem as appears to work apart from the difference in software between iPads and iPhones?

iPad mini 4, iPadOS 14

Posted on May 4, 2021 9:07 AM

Reply
Question marked as Top-ranking reply

Posted on May 4, 2021 6:07 PM

If set-up correctly, should you continue to experience difficulties, your WiFi Router may be unexpectedly failing to pass Apple Bonjour traffic on you local network - or your WiFi Router or Network Switch may be blocking this device discovery protocol.


The Apple Bonjour protocol uses mDNS (Multicast DNS) UDP port 5353.


You may find that restart of your network components will resolve the problem. You’ll need to restart your network devices in the correct order. Assuming that you WiFi Router provides DNS services for your network, restart devices in this order - allowing time for devices to fully boot/restart prior to restarting other devices:


  • WiFi Router
  • Upstream wired Network Switch(es)
  • WiFi Access Points / Network Extenders
  • Other fixed infrastructure devices - such as Printers
  • Client devices


Restarting your iPad, after restarting other devices in the correct sequence, is most simply achieved by a forced-restart of the iPad:


  • On an iPad with a Home button: Press and hold the top button and the Home button at the same time. When the Apple logo appears, release both buttons.
  • On an iPad with Face ID: Press and quickly release the volume up button, press and quickly release the volume down button, then press and hold the top button. When the Apple logo appears, release the button.



1 reply
Question marked as Top-ranking reply

May 4, 2021 6:07 PM in response to djdDavid

If set-up correctly, should you continue to experience difficulties, your WiFi Router may be unexpectedly failing to pass Apple Bonjour traffic on you local network - or your WiFi Router or Network Switch may be blocking this device discovery protocol.


The Apple Bonjour protocol uses mDNS (Multicast DNS) UDP port 5353.


You may find that restart of your network components will resolve the problem. You’ll need to restart your network devices in the correct order. Assuming that you WiFi Router provides DNS services for your network, restart devices in this order - allowing time for devices to fully boot/restart prior to restarting other devices:


  • WiFi Router
  • Upstream wired Network Switch(es)
  • WiFi Access Points / Network Extenders
  • Other fixed infrastructure devices - such as Printers
  • Client devices


Restarting your iPad, after restarting other devices in the correct sequence, is most simply achieved by a forced-restart of the iPad:


  • On an iPad with a Home button: Press and hold the top button and the Home button at the same time. When the Apple logo appears, release both buttons.
  • On an iPad with Face ID: Press and quickly release the volume up button, press and quickly release the volume down button, then press and hold the top button. When the Apple logo appears, release the button.



My iPad will not print to my Epsom printer, despite showing connected to my home wifi for both. My phones will both print. Only difference is that our iPads are updated to 14.5.1, and as yet our iPhones are not is this a problem with the update?

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.