You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

tvOS 15.0 introduces Dolby Atmos (Spatial Audio) bug

When I play an Apple Music track in Dolby Atmos (Spatial Audio) it only plays out of the front-left and subwoofer channel. My surround sound is a simple but solid six channel setup that has not had this problem before the new OS. Before and after my temporary fix below the audio/video receiver (AVR) shows the Apple TV outputting a 5.1 signal.


To fix the audio I just need to restart or seek within the track using the fast forward, playhead, or timed-lyrics functions. The music immediately (without mode-switching from the AVR) returns to proper surround sound. The issue unfortunately reoccurs when the next Dolby Atmos track begins.


All reasonable troubleshooting has been done to narrow down the issue to tvOS 15.0.

Apple TV 4K, tvOS 15

Posted on Sep 25, 2021 6:56 PM

Reply
Question marked as Top-ranking reply

Posted on Nov 12, 2021 6:35 AM

I posted this issue in the Apple TV forum and several other people stated they are having the exact same problem. I have not tried 15.1.1 because I upgraded to 15.2 and I can't seem to make it go back to 15.1.1.


My receiver is also a Denon 5.1 model that doesn't support Dolby Atmos natively. I am curious if this only affects 5.1 / 7.1 non-native Dolby Atmos receivers. I assume that is the case but it would be nice if everyone who is having this problem would include some information about their setup.


Setting my Audio Format to Dolby Digital 5.1 in the Apple TVs settings does seem to fix this issue (after starting a song and restarting it - the fix seems to stick). But, Dolby Digital encoding introduces more data compression so I would rather be sending multi channel PCM.





Similar questions

14 replies
Question marked as Top-ranking reply

Nov 12, 2021 6:35 AM in response to ookamiwarrior

I posted this issue in the Apple TV forum and several other people stated they are having the exact same problem. I have not tried 15.1.1 because I upgraded to 15.2 and I can't seem to make it go back to 15.1.1.


My receiver is also a Denon 5.1 model that doesn't support Dolby Atmos natively. I am curious if this only affects 5.1 / 7.1 non-native Dolby Atmos receivers. I assume that is the case but it would be nice if everyone who is having this problem would include some information about their setup.


Setting my Audio Format to Dolby Digital 5.1 in the Apple TVs settings does seem to fix this issue (after starting a song and restarting it - the fix seems to stick). But, Dolby Digital encoding introduces more data compression so I would rather be sending multi channel PCM.





Nov 18, 2021 11:56 AM in response to clintgray

I am so glad I found this thread here because now I know the problem is with TV OS 15. Your assessment appears to be accurate since my system also doesn't support Dolby Atmos but supports up to 7.1 LPCM (through eARC HDMI 2.0b) in addition to regular compressed Dolby Digital 5.1.


I have a Bose Soundbar 700 with surround speakers and bass module that outputs up to 7.1 LPCM. Prior to updating my Apple TV 4K (2nd gen) to TVOS 15, I had no issues. All the Dolby Atmos/Spatial Audio tracks were playing perfectly well.


It took me forever to figure out where the problem was originating from since my Bose Soundbar, Apple TV and the eARC HDMI Splitter (HD Furry Arcana) all received firmware/software updates with just few day apart from one another. So I had no idea which one of the three updates caused the problem. It was just a really bad coincidence that has been annoying me for a while.


Just like everyone else here, when I play an Atmos track on Apple Music, my surround speakers and center channel (I think) are completely mute. It was completely by accident I discovered that the remedy is to either scroll back to the beginning of the song or just fast forward few seconds into the song. This problem doesn't exist with Lossless tracks. It only happens with Atmos tracks.


I initially thought it was my eARC HDMI splitter since it was the most buggy device in my setup. Just this past weekend, I finally upgraded my TV to LG G1 OLED TV, which comes with the latest HDMI 2.1 eARC (120Hz) ports. To my surprise, the problem was still there. That meant the issue was either from my Bose Soundbar 700 or Apple TV 4K. Thanks to this thread, now I know the problem is with Apple TV which I suspected the least.


I really hope it gets fixes soon because I absolutely love the Atmos tracks and how airy and transparent everything sounds. It's a great showcase what my system can sound like at its optimum.


Thank you all guys...

Dec 13, 2021 4:42 PM in response to ookamiwarrior

Just a heads up: I updated to 15.2, and the issue still persisted, but after restarting the Apple TV, all channels are working fine. What a relief!


*edit - the issue persists on certain albums where the vocals are primarily in the left channel, like Getz / Gilberto, The Rolling Stones - Tattoo You, and Lorde - Pure Heroine. So, some albums are fine, some aren’t. Weird.

tvOS 15.0 introduces Dolby Atmos (Spatial Audio) bug

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.