You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Time Machine Backup Suddenly Failing

I have two Macs backing up to the same Time Machine. One is working fine, but the other has not been able to back up to Time Machine since the end of October. That is around the time that I upgraded to Ventura. The Mac that is unable to backup to Time Machine is too old to upgrade to Ventura. Could this be the problem? It was automatically backing up fine until the end of October, but since then no more backups.

MacBook Pro 13″

Posted on Nov 16, 2022 9:43 PM

Reply
Question marked as Top-ranking reply

Posted on Nov 18, 2022 11:28 AM

Thanks.


Sometimes, it becomes necessary to "reconnect" to the backup drive. This can occur if your backup drive is on a network (TC or AEBS) and there is a change to that network, such as a momentary power interruption for example. The following technique describes the procedure. It's harmless and will not affect any existing backups.


---


The following technique can be used to "reconnect" to the backup disk. It will not affect the existing backup history in any way.


Open Time Machine's Preferences and de-select the Back Up Automatically checkbox. Make sure no backups are in progress, otherwise you should wait for it to finish or terminate.


  • If the backup disk is directly connected to the Mac, disconnect it: drag its icon to the Trash, wait for it to disappear from the Desktop, and then physically disconnect it from the Mac.
  • If its icon does not appear on the Desktop, select External Disks in the Finder menu > Preferences... > General. You can de-select it later.


Then, click the "Select Disk..." button, select the backup disk, then Remove Disk, then Stop Using This Disk.


  • If you designated more than one backup destination, the "Select Disk..." button is replaced by an "Add or Remove Backup Disk..." option. You may have to scroll through the list of backup disks for that option to become visible.


This will not affect any existing backups.


  • If the backup disk had been directly connected to your Mac, reconnect the backup disk, power it on if required, and wait for its icon to appear on the Desktop.


Then, Select Disk... again in Time Machine's Preferences. Re-select the same one under Available Disks, then Use Disk.


  • If the backup is on a network (TC or AEBS), you will be prompted for the password you provided for that disk in AirPort Utility.
  • If the backup was encrypted, you will also be asked for the backup encryption password.


"Waiting to complete first backup" will appear, which means it won't do anything until the next scheduled backup. Despite the implication of that message, it does not mean it needs to create a completely new backup, as if it's creating a brand new one. Your existing backups will still be available.

  • If you don't want to wait that long, select Back Up Now.


A Notification may appear if your source volume is encrypted and the backup volume is not. That's normal.


Re-select Back Up Automatically. The "Preparing Backup..." status message will remain for a long time. Eventually, "Backing up xxx of yyy" will appear, but those values will not be accurate, nor will the "Estimated time remaining" in Time Machine's Preferences. Just ignore it. It may take a few hours even if your Mac is not allowed to sleep. Time Machine will also pause or become slow if you use your Mac for tasks it considers a higher priority.

Similar questions

9 replies
Question marked as Top-ranking reply

Nov 18, 2022 11:28 AM in response to singvogel

Thanks.


Sometimes, it becomes necessary to "reconnect" to the backup drive. This can occur if your backup drive is on a network (TC or AEBS) and there is a change to that network, such as a momentary power interruption for example. The following technique describes the procedure. It's harmless and will not affect any existing backups.


---


The following technique can be used to "reconnect" to the backup disk. It will not affect the existing backup history in any way.


Open Time Machine's Preferences and de-select the Back Up Automatically checkbox. Make sure no backups are in progress, otherwise you should wait for it to finish or terminate.


  • If the backup disk is directly connected to the Mac, disconnect it: drag its icon to the Trash, wait for it to disappear from the Desktop, and then physically disconnect it from the Mac.
  • If its icon does not appear on the Desktop, select External Disks in the Finder menu > Preferences... > General. You can de-select it later.


Then, click the "Select Disk..." button, select the backup disk, then Remove Disk, then Stop Using This Disk.


  • If you designated more than one backup destination, the "Select Disk..." button is replaced by an "Add or Remove Backup Disk..." option. You may have to scroll through the list of backup disks for that option to become visible.


This will not affect any existing backups.


  • If the backup disk had been directly connected to your Mac, reconnect the backup disk, power it on if required, and wait for its icon to appear on the Desktop.


Then, Select Disk... again in Time Machine's Preferences. Re-select the same one under Available Disks, then Use Disk.


  • If the backup is on a network (TC or AEBS), you will be prompted for the password you provided for that disk in AirPort Utility.
  • If the backup was encrypted, you will also be asked for the backup encryption password.


"Waiting to complete first backup" will appear, which means it won't do anything until the next scheduled backup. Despite the implication of that message, it does not mean it needs to create a completely new backup, as if it's creating a brand new one. Your existing backups will still be available.

  • If you don't want to wait that long, select Back Up Now.


A Notification may appear if your source volume is encrypted and the backup volume is not. That's normal.


Re-select Back Up Automatically. The "Preparing Backup..." status message will remain for a long time. Eventually, "Backing up xxx of yyy" will appear, but those values will not be accurate, nor will the "Estimated time remaining" in Time Machine's Preferences. Just ignore it. It may take a few hours even if your Mac is not allowed to sleep. Time Machine will also pause or become slow if you use your Mac for tasks it considers a higher priority.

Nov 17, 2022 5:45 PM in response to singvogel

Start from the beginning and describe the applicability or outcome of each of the steps described in that Support document. For example, is your backup disk supported by Time Machine? There are five potential options. Which one are you using? And so forth. Proceed to the next step, and the one after that.


Stop before erasing the backup disk, which may be necessary, but is dependent upon the results of each preceding step.

Nov 18, 2022 8:07 AM in response to John Galt

Everything is compatible. I have been running Time Machine on that computer since 2016. I'm now trying to transfer all the data from the old computer to a new computer using peer-to-peer transfer, since all of my backups are lost and Time Machine won't allow me to make any new ones. It has been running for more than 12 hours now, so I'm not sure if it is actually working.

Time Machine Backup Suddenly Failing

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.