You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Thunderbolt 2 to USB-C

I have a new hardware RAID that is USC-C. Connecting to my iMac Late 2015 with a USB to USB-C cable is no problem. Tried an Apple USB-C to Thunderbolt 2 adapter, but no dice. The RAID does not show up, and System Report says no Thunderbolt 2 device is connected.


Ideas? Is this compatible, or is it the hardware RAID that is not compatible?

Posted on Mar 12, 2023 7:40 AM

Reply
Question marked as Top-ranking reply

Posted on Mar 12, 2023 6:28 PM

It sounds like your RAID device only supports the USB protocol and not the Thunderbolt protocol. When connecting devices to a computer, it is very important to know the protocol being used by the device over the USB-C ports. Unlike your Mac where the USB-C ports support both USB & Thunderbolt protocols (for example: some of the Mac Studio ports do not support both), most external USB-C devices will only support one of the protocols.


A device should ideally mark the USB-C port with the protocol supported. A Thunderbolt port should have a lightning bolt icon, whereas a USB port should show a trident symbol. If there is no symbol next to the USB-C port, then most likely it only supports the USB protocol. If in doubt, check the product documentation and user manual to confirm.


You can only connect USB devices to another port which supports the USB protocol. And you can only connect a Thunderbolt device to another port which supports the Thunderbolt protocol. You cannot convert between the two protocols, at least not with any simple inexpensive adapters. Keep this in mind when connecting USB3/4 or Thunderbolt 3/4 devices to older Macs only supporting the older legacy ports (USB3 A/B, or Thunderbolt 1/2 ports).


FYI, "USB-C" is only a connector designation & type.

Similar questions

8 replies
Question marked as Top-ranking reply

Mar 12, 2023 6:28 PM in response to ILuvMnMs

It sounds like your RAID device only supports the USB protocol and not the Thunderbolt protocol. When connecting devices to a computer, it is very important to know the protocol being used by the device over the USB-C ports. Unlike your Mac where the USB-C ports support both USB & Thunderbolt protocols (for example: some of the Mac Studio ports do not support both), most external USB-C devices will only support one of the protocols.


A device should ideally mark the USB-C port with the protocol supported. A Thunderbolt port should have a lightning bolt icon, whereas a USB port should show a trident symbol. If there is no symbol next to the USB-C port, then most likely it only supports the USB protocol. If in doubt, check the product documentation and user manual to confirm.


You can only connect USB devices to another port which supports the USB protocol. And you can only connect a Thunderbolt device to another port which supports the Thunderbolt protocol. You cannot convert between the two protocols, at least not with any simple inexpensive adapters. Keep this in mind when connecting USB3/4 or Thunderbolt 3/4 devices to older Macs only supporting the older legacy ports (USB3 A/B, or Thunderbolt 1/2 ports).


FYI, "USB-C" is only a connector designation & type.

Thunderbolt 2 to USB-C

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.