You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

If I upgrade to mesh router, can I continue to use Airport Extreme as a wireless back up for multiple devices?

I want to upgrade my home network to a mesh router. I currently have an Airport Extreme as my primary router plus an Airport Express that I use as an extender. Currently I back up two iMacs and a MacBook Pro to the Extreme. Is it possible to continue to use the Extreme as a wireless back up source for my devices once I replace it with a mesh router? If so, what's the best way to do it?


Preferred mesh routers? My house is 2000 sf tri-level.



iMac 27", macOS 10.15

Posted on Dec 22, 2019 10:48 AM

Reply
Question marked as Top-ranking reply

Posted on Dec 22, 2019 11:39 AM

Will setting up the Extreme as a bridge automatically disable the wireless radios, and if not, what is the procedure to accomplish the task?

No, reconfiguring the Extreme as a bridge will NOT automatically disable the wireless radios. It will take two separate set of steps to accomplish this.


  1. To reconfigure the base station as a bridge: AirPort Utility > Select the Extreme > Edit > Network tab > Router Mode = Off (Bridge Mode)
  2. To disable the wireless radios: Wireless tab > Network Mode = Off


Also, does the Extreme have to be connected to one of the nodes or can it be connected to the primary router?

No, the Extreme can be connected to any of the nodes, including the primary router.


I also need a mesh router with at least one USB port as I currently have two printers connected to the network, one wireless and one not.

You could still use the Extreme for this ... or review each of the mesh offerings to see which offer USB ports on their nodes ... but be aware that just having a USB port does not necessarily mean it will perform as a print server. You need to verify that as well.


FWIW, I currently replaced my Apple networking ecosystem with one provided by Ubiquiti. I use their UniFi solution as my home was pre-wired for Ethernet. They also have a mesh option as well, but Ubiquiti has a bit of a learning curve as they are not quite "plug and play," and why I didn't initially suggest it.

5 replies
Question marked as Top-ranking reply

Dec 22, 2019 11:39 AM in response to Ken!

Will setting up the Extreme as a bridge automatically disable the wireless radios, and if not, what is the procedure to accomplish the task?

No, reconfiguring the Extreme as a bridge will NOT automatically disable the wireless radios. It will take two separate set of steps to accomplish this.


  1. To reconfigure the base station as a bridge: AirPort Utility > Select the Extreme > Edit > Network tab > Router Mode = Off (Bridge Mode)
  2. To disable the wireless radios: Wireless tab > Network Mode = Off


Also, does the Extreme have to be connected to one of the nodes or can it be connected to the primary router?

No, the Extreme can be connected to any of the nodes, including the primary router.


I also need a mesh router with at least one USB port as I currently have two printers connected to the network, one wireless and one not.

You could still use the Extreme for this ... or review each of the mesh offerings to see which offer USB ports on their nodes ... but be aware that just having a USB port does not necessarily mean it will perform as a print server. You need to verify that as well.


FWIW, I currently replaced my Apple networking ecosystem with one provided by Ubiquiti. I use their UniFi solution as my home was pre-wired for Ethernet. They also have a mesh option as well, but Ubiquiti has a bit of a learning curve as they are not quite "plug and play," and why I didn't initially suggest it.

Dec 22, 2019 11:03 AM in response to Ken!

Most new wireless mesh system provide nodes with Ethernet port(s). In that case, you can still connect your AirPort Extreme to one of those nodes by Ethernet and continue to use it for Time Machine backups. You will also need to reconfigure the Extreme as a bridge and disable its wireless radios as they will no longer be needed in this configuration.


As far as which mesh systems to go with, will depend on, whether or not, your home is pre-wired for Ethernet. I am assuming that it is not and your goal is to have wireless connections between these nodes ... correct? If that's the case, you will want a mesh system that incorporates a dedicated wireless backhaul for the best overall wireless performance. Those would include mesh systems from: Asus HiveSpot, D-Link Covr, Linksys Velop, or Netgear Orbi. Of those, I suggest that you take a look at the last one: Netgear Orbi.


Something else to consider. As you know Apple has gotten out of the networking hardware business. Your AirPort Extreme is on "borrowed time" and you should be looking for an alternative solution for TM backups. One suggestion is to replace the Extreme with a dedicated NAS. Those provided by Synology also support TM backups.

Dec 22, 2019 11:25 AM in response to Tesserax

Tesserax, thanks for the response. You are correct in assuming that my house is not wired for ethernet, which brings me to a couple of other questions; Will setting up the Extreme as a bridge automatically disable the wireless radios, and if not, what is the procedure to accomplish the task? Also, does the Extreme have to be connected to one of the nodes or can it be connected to the primary router? I also need a mesh router with at least one USB port as I currently have two printers connected to the network, one wireless and one not.

If I upgrade to mesh router, can I continue to use Airport Extreme as a wireless back up for multiple devices?

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.