You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Target mode with iMac

I just wanted to verify that the following configuration should work to use iMac in target display mode.


2013 21.5" non-retina display iMac running High Sierra

2018 13" MacBook Pro running Mojave

using usb-c to thunderbolt adapter with thunderbolt cable for connectivity


Based on https://support.apple.com/en-us/HT204592


You can connect any of these older iMac models to another Mac from 2019 or earlier for use as an external display. Learn how to identify your iMac model.

Target display mode requires macOS High Sierra or earlier on the iMac used as the external display. It does not work with macOS Mojave or later.


It seems like it should since iMac is not on Mojave, non-retina and between 2011-2014. It unclear in the article if MacBook Pro has an IOS limitation, but before I go to much farther, I'd like to verify that the above configuration is a supported target mode configuration. Thanks.

Posted on Jun 8, 2020 10:17 PM

Reply

Similar questions

6 replies

Jun 10, 2020 9:09 PM in response to BDAqua

The question then becomes how do I troubleshoot the issue. If I look at the system report/hardware/thunderbolt it appears that they can see each other, so cables are probably good. I've tried 2 keyboards to check command f2. I also used direct thunderbolt (no usb-c to thunderbolt adapter) between macbook pro mid 2014 running catalina and imac, still no joy. Is there the equivalent of /etc/messages or event log on imac I could check for errors. Any other thoughts? Thanks!



Jun 10, 2020 9:17 PM in response to cabb2020

I've also tried this app. It turns of the bluetooth, but does not turn the display to target mode.


 VirtualKVM. This was designed specifically for people wanting to use their iMacs in target display mode, and works especially well in situations where you want to connect a MacBook to the iMac. For example, if you plug your MacBook into your iMac via Thunderbolt, this extention will automatically switch the iMac to Target Display Mode, allowing you to use your iMac as a monitor. It also switches off the Bluetooth on the iMac, freeing up your mouse and keyboard to pair with your MacBook (assuming you're using a bluetooth keyboard and mouse). When you unplug the MacBook, the iMac's Bluetooth will be powered back up and the monitor restored.

Target mode with iMac

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.