You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Not able to connect dual monitors on HDMI on my MacBook Pro 13 M1 2020 model

Not able to connect dual monitors on HDMI on my MacBook Pro 13 M1 2020 model.

All docks which have 2 HDMI ports support only one monitor, whichever is connected first.


Can you suggest any alternatives, please?

MacBook Pro 13″, macOS 12.3

Posted on Apr 1, 2022 4:58 AM

Reply
Question marked as Top-ranking reply

Posted on Apr 1, 2022 7:33 AM

immanuel2112 wrote:

My question is how can I connect dual external displays.


Macs with M1 (and not M1 Pro, M1 Max, nor M1 Ultra) supports a maximum two displays, one of which is always internal on the M1 laptops. Rephrased, Mac laptops with M1 (and not M1 Pro, M1 Max, nor M1 Ultra) support one external display.


MacBook Pro (13-inch, M1, 2020) - Technical Specifications


8 replies
Question marked as Top-ranking reply

Apr 1, 2022 7:33 AM in response to immanuel2112

immanuel2112 wrote:

My question is how can I connect dual external displays.


Macs with M1 (and not M1 Pro, M1 Max, nor M1 Ultra) supports a maximum two displays, one of which is always internal on the M1 laptops. Rephrased, Mac laptops with M1 (and not M1 Pro, M1 Max, nor M1 Ultra) support one external display.


MacBook Pro (13-inch, M1, 2020) - Technical Specifications


Apr 1, 2022 6:19 AM in response to immanuel2112

DisplayLink technology creates a "fake" display buffer in RAM, sends the data out over a slower interface to a stunt box with DisplayLink custom chips that put that data back onto a "legacy" interface. It is not a true "accelerated" display, and it can suffer from lagging. Just adding the DisplayLink Driver is not adequate to get a picture -- you need a DisplayLink "stunt-box" or a Dock that includes DisplayLink chips.


————

It may be acceptable for a second display showing slow-to-change data such as computer program listings, stock quotes, or spreadsheets, but NOT for full motion Video, not for Video editing, and absolutely not for gaming. Mouse-tracking on that display can lag, and can make you feel queasy.


In a pinch, it may even play Internet videos (as one user put it) “without too many dropped frames".


This is in stark contrast to the Apple standard for its built-in hardware-accelerated displays, which are suitable for production/display of cinema-quality video with NO dropped frames, and NO dropouts or partial-blank scan lines due to memory under-runs or other issues.


--------

It is really nice to know that you can use a DisplayLink display if you MUST have an additional display for some of the types of data I mentioned. But that is NOT the same as the computer supporting a second, built-in, Hardware-accelerated display.


These displays depend on DisplayLink software, and are at the whim of Apple when they make MacOS changes. There have been cases where MacOS changes completely disabled DisplayLink software, and it took some time for them to recover.


--------

I think the Big Surprise for a lot of Hub/Dock buyers is that they thought they were getting a "real" display, but actually got a DisplayLink "fake" Display. If you got what you expected in every case, I would not use such pejorative terms to describe DisplayLink.

Not able to connect dual monitors on HDMI on my MacBook Pro 13 M1 2020 model

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.