You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Can't connect to mounted USB drives over network after Catalina upgrade

I recently upgraded my iMac to Catalina from Mojave.


When I try to connect to any mounted USB drives from my MBP (el Capitan) over my network, I get an error "The operation can't be completed because the original item >drive name< can't be found.", despite the USB drives being listed as being there:





I booted the iMac into a backupdrive of it's previous Mojave system, and there's no issues...everything works fine with it, so it's something with Catalina.


AFP sharing IS turned off on the iMac (Catalina) but it has been on in this process. The error seems like a location cache problem on the MBP (El Capitan), but I can't find a way to clear that info, if that's what it is (restrarting hasn't fixed it).


Any help would be appreciated.

iMac 27″, macOS 10.15

Posted on Sep 6, 2022 1:03 AM

Reply
Question marked as Top-ranking reply

Posted on Sep 7, 2022 5:11 PM

I solved my problem by putting  /usr/sbin/smbd   into FULL DISK ACCESS under Privacy tab in the Security & Privacy system preference on my iMac (Catalina).

The Macbook Pro (El Capitain) now connects just how I think it should.

Similar questions

4 replies

Sep 7, 2022 11:26 AM in response to Todd Kogutt

Hello Todd Kogutt,


We understand you have issues connecting to your mounted USB drives on your Mac. We'll do our best to assist with this.


Does the USB drive have a driver for Catalina? Without the USB drive information, we cannot assist in looking it up. With that said, you may want to visit the manufacturer's website to see if one is specifically available for Catalina.


Have you had a chance to try testing this in safe mode yet? If not, let's try that: How to use safe mode on your Mac - Apple Support


How to use safe mode on your Mac

Safe mode can help you to determine whether an issue is caused by software that loads as your Mac starts up.

Safe mode prevents your Mac from loading certain software as it starts up, including login items, system extensions not required by macOS, and fonts not installed by macOS. It also does a basic check of your startup disk, similar to using First Aid in Disk Utility. And it deletes some system caches, including font caches and the kernel cache, which are automatically created again as needed.

Safe mode is particularly useful when you're trying to resolve an issue that doesn't seem to be associated with using any particular app. As always, keeping your software up to date is the first step toward resolving any software issue.

How to use safe mode

Determine whether you're using a Mac with Apple silicon, then follow the appropriate steps:

Apple silicon

1. Shut down your Mac.
2. Turn on your Mac and continue to press and hold the power button until you see the startup options window.
3. Select your startup disk, then press and hold the Shift key while clicking “Continue in Safe Mode.”
4. Log in to your Mac. You might be asked to log in again.

Intel processor

1. Turn on or restart your Mac, then immediately press and hold the Shift key as your Mac starts up.
2. Release the key when you see the login window, then log in to your Mac. 
3. You might be asked to log in again. On either the first or second login window, you should see ”Safe Boot” in the upper-right corner of the window.
If the issue continues in safe mode

If the issue continues while in safe mode, or your Mac restarts several times and then shuts down while starting up in safe mode, you should reinstall macOS and make sure that your Apple software and third-party apps are up to date.

If the issue doesn't continue in safe mode

If the issue doesn't continue while in safe mode, leave safe mode by restarting your Mac normally. Then test for the issue again. The issue might be resolved.

If the issue returns after leaving safe mode, startup items are probably at fault. Apps can install such items in numerous places, and they aren't always easy to find or recognize. For that reason, you should first make sure that you've installed any available updates for your Apple software and third-party apps.

If updating your software doesn't help, try any of these solutions:
- Test your login items.
- To learn whether software in your user account is causing the issue, set up a new user account, then log in to it and try to reproduce the issue in that account.
- Unplug all accessories from your Mac, including printers, drives, USB hubs, and other nonessential devices. You could have an issue with one or more of those devices or their cables.
- Reinstall macOS.

If you still need help, please contact Apple Support.

Learn more
Some features might not work in safe mode, such as movie playback in DVD Player, video capture, file sharing, Wi-Fi, some accessibility features, some audio devices, and some devices that connect via USB, Thunderbolt, or FireWire. Accelerated graphics are disabled, which could cause blinking or distortion onscreen during startup.


Looking forward to hearing how it goes, take care.

Can't connect to mounted USB drives over network after Catalina upgrade

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.