You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

connectMacBook Pro (2020-13inch) to iMac(21inch)4;) to use the monitor

how can I connect a MacBook Pro 2020 - 13 inch - to a 2011 iMac with a 21.5 monitor ? I would like to use that monitor - if possible. Both machines work.



MacBook Pro 13″, macOS 13.4

Posted on Jun 7, 2023 8:44 PM

Reply
Question marked as Top-ranking reply

Posted on Jun 7, 2023 8:47 PM

Review the document: Use your iMac as a display with target display mode - Apple Support

Target display mode is a feature available with late 2009-Mid 2014 iMacs. The display Mac has to be running macOS High Sierra or older and the signal producing Mac has to be running macOS Catalina (ca. 2019) or earlier.


3 replies

Jun 7, 2023 10:46 PM in response to ranchmary

In short you cannot unless you purchase third party software/hardware such as Luna display. Please remember that Macs are computers, they are not displays for other devices.


Also, the overall best solution is to simply buy yourself and external display. This is less expensive, dead simple to setup and use and much more reliable than any third party solution.

Jun 8, 2023 4:18 AM in response to ranchmary

You can't. The Target Display Mode feature of the 2011 iMacs, that allowed their use as Thunderbolt displays, was limited after the fact by the "2019 or earlier" and "macOS Catalina or earlier" restriction on the source Mac.


If this restriction didn't exist, you'd need a Thunderbolt 3-to-2 adapter ($50) and a Thunderbolt 1/2 cable ($30) to reuse a 21.5" Mid 2011 or Late 2011 iMac, with a resolution of 1920x1080 pixels, as a less convenient (have to boot up and press Command-F2) equivalent of a 24" 1920x1080 pixel monitor. Spending $80 on cabling and adapters when new monitors (with a long life ahead of them) have gotten so cheap might not be financially attractive.


The 27" Late 2009 and Mid 2010 iMacs are the ones for which the new restrictions on the source Mac hurt, since if they really acted as Mini DisplayPort displays in TDM, you'd expect to be able to hook them up to one of today's Macs with just a cheap (and reusable) USB-C to Mini DisplayPort adapter cable.


Even there, you can get new 27" 2.5K monitors for as little as $300 – $400 (rough guess), down from the $1200 that Dell wanted for such a monitor back when its monitor and the 27" Late 2009 iMac were new to the market.

connectMacBook Pro (2020-13inch) to iMac(21inch)4;) to use the monitor

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.