You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Watch is on but not showing as charging and keeps flashing with the apple logo

Watch is on but not showing as charging and keeps flashing with the apple logo

Apple Watch Series 6, watchOS 9

Posted on Jul 15, 2023 6:18 AM

Reply
Question marked as Top-ranking reply

Posted on Jul 15, 2023 6:33 AM

Try and force restart your apple watch

If you can’t turn off your Apple Watch or if the problem continues, you may need to force your Apple Watch to restart. Do this only if you’re unable to restart your Apple Watch.

To force restart, hold down the side button and the Digital Crown at the same time for at least ten seconds, until the Apple logo appears.

4 replies
Question marked as Top-ranking reply

Jul 15, 2023 6:33 AM in response to Whittle80

Try and force restart your apple watch

If you can’t turn off your Apple Watch or if the problem continues, you may need to force your Apple Watch to restart. Do this only if you’re unable to restart your Apple Watch.

To force restart, hold down the side button and the Digital Crown at the same time for at least ten seconds, until the Apple logo appears.

Jul 17, 2023 5:22 AM in response to Whittle80

If your Apple Watch is on but not showing that it's charging and continuously flashing the Apple logo, it could indicate a few potential issues. Here are some troubleshooting steps you can try to resolve the problem:

  1. Check the Charging Cable and Power Source: Ensure that the charging cable is firmly connected to the back of the Apple Watch and the USB end is connected to a working power source, such as a wall adapter or a USB port on your computer. Sometimes, a loose connection can prevent the watch from charging properly.
  2. Use a Different Charging Cable and Adapter: If possible, try using a different Apple Watch charging cable and wall adapter to see if the issue lies with the accessories.
  3. Force Restart the Apple Watch: To force restart the Apple Watch, press and hold both the side button and the digital crown simultaneously for about 10 seconds. Release the buttons when you see the Apple logo. This may help to resolve any temporary software glitches that could be causing the charging issue.
  4. Check for Software Updates: Ensure that your Apple Watch has the latest software updates installed. Sometimes, updating the watch's software can fix bugs and issues.
  5. Perform a Hard Reset: If the force restart doesn't work, try performing a hard reset. To do this, press and hold both the side button and the digital crown until the screen goes blank and the Apple logo appears again.
  6. Clean the Charging Port: Over time, the charging port on the back of the Apple Watch can accumulate debris, which may interfere with charging. Use a soft, lint-free cloth to clean the charging area and remove any dust or dirt carefully.
  7. Contact Apple Support: If none of the above steps resolve the issue, it's best to contact Apple Support or visit an authorized Apple Service Provider for further assistance. There might be a hardware problem with your Apple Watch that requires professional attention.

Remember that troubleshooting steps can vary depending on the model of your Apple Watch and its software version. Always ensure that your watch is charged and updated regularly to maintain optimal performance.

Watch is on but not showing as charging and keeps flashing with the apple logo

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.