You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

AirPort Utility not detecting AirPort Express (2nd Gen) to extend existing AirPort Time Capsule network

I have an AirPort Time Capsule 3TB 802.11ac connected and working. I want to extend this existing network with an AirPort Express 802.11n (2nd Generation) but it's not showing up under Other Wi-Fi Devices ("No new Wi-Fi devices discovered") in AirPort Utility (v6.3.9).


I connected the AP Express to the AP Time Capsule using a physical ethernet cable and AirPort Utility immediately detected the AP Express and I was able to configure it. While it was connected, I made sure that all devices had the most recent firmware versions available. However, once I disconnect the cable it's not able to detect it over wi-fi.


Here's what I have done so far:

  1. Restarted my computer, AP Express, and AP Time Capsule
  2. Hard reset all devices and successfully re-created the network using the AP Time Capsule


Screen captures of current config in case that can help


Thanks in advance for your help.

Posted on Apr 20, 2021 7:10 PM

Reply
Question marked as Top-ranking reply

Posted on Apr 20, 2021 7:42 PM

I have an AirPort Time Capsule 3TB 802.11ac connected and working. I want to extend this existing network with an AirPort Express 802.11n (2nd Generation) but it's not showing up in AirPort Utility (v6.3.9) under Other Wi-Fi Devices ("No new Wi-Fi devices discovered").


Rather than trying to use "Other Wi-Fi Devices" in AirPort Utility, you might want to try the instructions in the AirPort Express Setup Guide to see if that might help move things along.


"If you’re using Mac OS X, you can use the Wi-Fi status menu in the menu bar to choose your AirPort Express. When you choose it, AirPort Utility opens to set up your AirPort Express."


Assuming that you have performed a Hard Reset on the AirPort Express, and restarted your Mac and Time Capsule.


Click on the WiFi menu at the top of your Mac's screen

Look for a listing of New AirPort Base Station

Click directly on AirPort Express





When you click on AirPort Express, that will start up the setup "wizard" or "helper".


I'm not clear on whether you are planning to connect the AirPort Express back to the Time Capsule using a WiFi connection and extend the network that way.......or......whether you plan to connect the Express back to the Time Capsule using a permanent wired Ethernet cable connection.


If you want the Express to connect using wireless, then it has to be set up that way.....without an Ethernet connection. If you want the Express to connect using Ethernet and extend the network that way, the Ethernet cable needs to be connected between the AirPort Express and Time Capsule.....before.....you run the setup on the AirPort Express, and it must remain permanently connected.


In other words, you cannot use an Ethernet cable connection to set up the Express if you plan to have it connect back to the Time Capsule using a wireless connection.


The Ethernet connection is always best to use if possible, because the wireless method of extending the network will always result in a loss of half of the potential speed on the network. That loss will not occur if the Ethernet method is used.


If things are still not working using the WiFi menu above to start the setup process.....and.....you have an iPhone or iPad handy, try using the iOS device to set up the AirPort Express. To do that.......


Go to the Home Screen on the iOS device

Tap on Settings

Tap on WiFi

Tap on AirPort Express under the listing of Set Up New AirPort Base Station





If you plan to have the Express connect using WiFi to extend the network, and have reset the Express a few times and tried both the Mac and iOS type setup.......that would indicate that the WiFi is acting up......or not working......on the AirPort Express.








Similar questions

3 replies
Question marked as Top-ranking reply

Apr 20, 2021 7:42 PM in response to J-P

I have an AirPort Time Capsule 3TB 802.11ac connected and working. I want to extend this existing network with an AirPort Express 802.11n (2nd Generation) but it's not showing up in AirPort Utility (v6.3.9) under Other Wi-Fi Devices ("No new Wi-Fi devices discovered").


Rather than trying to use "Other Wi-Fi Devices" in AirPort Utility, you might want to try the instructions in the AirPort Express Setup Guide to see if that might help move things along.


"If you’re using Mac OS X, you can use the Wi-Fi status menu in the menu bar to choose your AirPort Express. When you choose it, AirPort Utility opens to set up your AirPort Express."


Assuming that you have performed a Hard Reset on the AirPort Express, and restarted your Mac and Time Capsule.


Click on the WiFi menu at the top of your Mac's screen

Look for a listing of New AirPort Base Station

Click directly on AirPort Express





When you click on AirPort Express, that will start up the setup "wizard" or "helper".


I'm not clear on whether you are planning to connect the AirPort Express back to the Time Capsule using a WiFi connection and extend the network that way.......or......whether you plan to connect the Express back to the Time Capsule using a permanent wired Ethernet cable connection.


If you want the Express to connect using wireless, then it has to be set up that way.....without an Ethernet connection. If you want the Express to connect using Ethernet and extend the network that way, the Ethernet cable needs to be connected between the AirPort Express and Time Capsule.....before.....you run the setup on the AirPort Express, and it must remain permanently connected.


In other words, you cannot use an Ethernet cable connection to set up the Express if you plan to have it connect back to the Time Capsule using a wireless connection.


The Ethernet connection is always best to use if possible, because the wireless method of extending the network will always result in a loss of half of the potential speed on the network. That loss will not occur if the Ethernet method is used.


If things are still not working using the WiFi menu above to start the setup process.....and.....you have an iPhone or iPad handy, try using the iOS device to set up the AirPort Express. To do that.......


Go to the Home Screen on the iOS device

Tap on Settings

Tap on WiFi

Tap on AirPort Express under the listing of Set Up New AirPort Base Station





If you plan to have the Express connect using WiFi to extend the network, and have reset the Express a few times and tried both the Mac and iOS type setup.......that would indicate that the WiFi is acting up......or not working......on the AirPort Express.








AirPort Utility not detecting AirPort Express (2nd Gen) to extend existing AirPort Time Capsule network

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.