You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

MacBook Pro cant boot in recovery after erase

Hello Community!

I have a 13inch MacBook Pro from mid 2009

I erased the hard drive from a usb flash drive with mac os x yosemite buuut after the erase it failed to install so i decided to go in the recovery buuuut it dosent work .... only NetBoot and Thunderbolt work :/

Does anyone know whats happening with it

*When i power it on after a few seconds it shows the missing hard drive simbol*

MacBook Pro 13″, macOS 10.13

Posted on Aug 6, 2022 10:50 PM

Reply
Question marked as Top-ranking reply

Posted on Aug 6, 2022 10:55 PM

GabrielPaun Said:

"MacBook Pro cant boot in recovery after erase: [...]I erased the hard drive from a usb flash drive with mac os x yosemite buuut after the erase it failed to install so i decided to go in the recovery buuuut [...]*When i power it on after a few seconds it shows the missing hard drive simbol*"

-------


Troubleshooting Missing Hard Drive:



Mount the Drive:

Boot into Recovery Mode (Intel or Silicon) . You need to click the “Mount’ button to proceed. So, select the drives, and then click "Mount" Try rebooting once more. If of no success, then click unmount button, and then the mount button. Try rebooting once more. It looks dulled-out. So, if you cannot click it, then click the First Aid button to fix this volume.

14 replies
Question marked as Top-ranking reply

Aug 6, 2022 10:55 PM in response to GabrielPaun

GabrielPaun Said:

"MacBook Pro cant boot in recovery after erase: [...]I erased the hard drive from a usb flash drive with mac os x yosemite buuut after the erase it failed to install so i decided to go in the recovery buuuut [...]*When i power it on after a few seconds it shows the missing hard drive simbol*"

-------


Troubleshooting Missing Hard Drive:



Mount the Drive:

Boot into Recovery Mode (Intel or Silicon) . You need to click the “Mount’ button to proceed. So, select the drives, and then click "Mount" Try rebooting once more. If of no success, then click unmount button, and then the mount button. Try rebooting once more. It looks dulled-out. So, if you cannot click it, then click the First Aid button to fix this volume.

Aug 8, 2022 4:53 AM in response to GabrielPaun

GabrielPaun Said:

"MacBook Pro cant boot in recovery after erase: The problem is … there its no recovery …command r doesn’t work at all I tried with an installer drive for os x el capitian .. No success

———-


Based on Personal Experience:


Some Thoughts on This:

A. Where to Get the Disk:

I still have my 10.6 Snow Leopard disks that came with my 2010 17” MPB. So, that is what I use (for troubleshooting purposes). So, if you don’t have one, nor anyone you know, then likely, you could likely find it on Amazon.


B. If Snow Leopard is a must, then get the latest updates here:


C. Updating Non-Apple Applciations:

As for applications, contact the developer, asking them if they have updates for it.


D. For Note:

I have a much older Mac with Snow Leopardinstalled on it. I use it for troubleshooting purposes.

Aug 7, 2022 10:07 AM in response to GabrielPaun

Internet Recovery is NOT available in your model’s (pre-dating about 2012) ROM, so you will need to explore this list of other possibilities.


When your computer was released, the way you launched the required Utilities (including Disk Utility and Installer) was to use the ones on the Release software DVD. if you have a model-specific version for your model (unlikely) or a Full Retail 10.6 DVD, you use its Utilities, boot and install that version, then use Software update to get to 10.6.8 with all updates, which is the version that can reach out to the Mac App store and download and install a later version. 10.11 El Capitan is a recommended waypoint, even if you expect to install a later version, because it has an improved Mac App Store that makes getting later versions much easier.


The next source of Utilities is the Recovery Partition on the boot drive. If your drive spins up, even if not MacOS bootable, it may still have a usable recovery partition. To get there, try invoking recovery with Command-R or hold Alt/Option at startup and see if the recovery partition shows as a potentially bootable drive.


Recovery Partitions up through 10.12 Sierra can be found with the Startup Manager (Alt/Option boot). At 10.13, if an SSD boot drive is used, the format is transitioned to APFS. The Recovery partition is present, but it is inside the APFS volume structures, and the Startup Manager on an older Mac can not find it.


The next source of Utilities to consider is any MacOS 10.6 or later versions on any additional drives or clones you may (or may not) have lying about, even if they are from another Mac. You can use those Utilities to ERASE a new drive, and start the installer to place MacOS on the new drive.


The next source to consider is a Time Machine backup drive. Versions from 10.7.3 or later are said to contain a Recovery Partition that could be used to ERASE a new drive and run Installer to place MacOS on a new drive.


IF you have a different Mac, you can use it to download MacOS install image, then interrupt the process and create a BOOTABLE USB-stick Installer/Utilities stick. BOOTABLE is key, because the way you will install from this USB-Stick is to BOOT the USB-stick, and use its Utilities to ERASE your drive and start the Installer. here is the article on bootable USB-Stick Utilities/Installer:


What you need to create a bootable installer

• A USB flash drive or other secondary volume formatted as GUID partition Map, Mac OS Extended, with at least 14GB of available storage

• A downloaded installer for macOS Big Sur, Catalina, Mojave, High Sierra, or El Capitan.

from:

How to create a bootable installer for macOS - Apple Support

How to create a bootable installer for macOS - Apple Support


NB>> if you name your incoming USB stick exactly MyVolume, you can copy and paste the very long Terminal command from the article directly into the Terminal window, without having to change anything.


MacBook Pro cant boot in recovery after erase

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.