You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

iLINK video driver

If my SONY DIGCAM video output is DV and I use a cable to my MacBookPro's IEEE1394 connector will it automatically import to Final Cut Pro?

iMac, OS X 10.11

Posted on Oct 20, 2022 5:43 PM

Reply
Question marked as Top-ranking reply

Posted on Oct 21, 2022 8:31 AM

Hi, Geistownjohnny..... Not quite....on the Sony DIGCAM you have to put it into VTR mode, (Playback) make sure the heads in the camcorder are clean, that it is plugged into an AC Power source, and that IEEE 1394 (FireWire) mode/ is enabled/turned on, on the camcorder itself. then you'll need a 4 pin to 8 pin Firewire cable/Adapter, and if your iMac doesn't have FireWire, then a Firewire to Thunderbolt Adapter..... Make the connection between camcorder and iMac (or any Mac) when both are turned off....then start up your Mac, turn on the camcorder, put it into VTR mode, and that IEEE 1394 is enabled/turned on, then load a tape into the camcorder.... Get Final Cut pro running, then choose "Import Video" and then press play on the Camcorder and it'll do just that...please remember that importing/capturing video happens in real time, so a 60 minute tape will take...1 hour....


good luck

John B

2 replies
Question marked as Top-ranking reply

Oct 21, 2022 8:31 AM in response to Geistownjohnny

Hi, Geistownjohnny..... Not quite....on the Sony DIGCAM you have to put it into VTR mode, (Playback) make sure the heads in the camcorder are clean, that it is plugged into an AC Power source, and that IEEE 1394 (FireWire) mode/ is enabled/turned on, on the camcorder itself. then you'll need a 4 pin to 8 pin Firewire cable/Adapter, and if your iMac doesn't have FireWire, then a Firewire to Thunderbolt Adapter..... Make the connection between camcorder and iMac (or any Mac) when both are turned off....then start up your Mac, turn on the camcorder, put it into VTR mode, and that IEEE 1394 is enabled/turned on, then load a tape into the camcorder.... Get Final Cut pro running, then choose "Import Video" and then press play on the Camcorder and it'll do just that...please remember that importing/capturing video happens in real time, so a 60 minute tape will take...1 hour....


good luck

John B

iLINK video driver

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.